saptha Engineers

Home

Site Map

SAPTHASHREE ENGINEERS & CONSULTANTS

		Home

	About Us

	Products

	Client

	Contact Us

What does that mean in practice ?

Electrical installations with Abb i-bus offer the user numerous advantages:

Basic Principle

With ABB i-bus, electrical loads are not switched directly in the circuit with switches and push buttons as in conventional electrical iinstallations

Commands are sent instead from sensors (e.g. electronic push buttons) on a twin - core data cable and are received by actuators. The actuators then execute these commands, for example by switching the circuit.

• Electrical loads can be switched independently of the electrical circuit (e.g. the light in the hallway can be operated from the lounge or from elsewhere in the house).
• Electrical loads can be switched by several sensors without complicated two-way circuits or remote-control switches.
• Functional associations between actuators and sensors can be modified at any time and adapted to individual requirements.
• All the functions can be programmed so that they run automatically. Logic operations can also be created (e.g.if the brightness level drops below a specific value after 18:00, all the shutters are lowered and the light in the hallway is switched on)
• The switching states of electrical loads can be displayed.


Sensors		Actuators
• Push buttons and switches • Room thermostats • Movement sensors • Time switches • Binary inputs • Zone terminals • Current modules • Analogue Inputs		• Binary outputs • Dommers • Light controllers • Shutter actuators • Universal Concentrators • Display units